Skip to coordinate tool

Search and convert coordinates

Enter coordinates, use your current location or select a point on the map. The tool converts the point between WGS84, UTM, MGRS and supported national coordinate systems.

Enter coordinates

Enter coordinates in any supported format. A system name is optional. If the numbers have more than one valid interpretation, choose the correct one.

Examples

Find coordinates on the map

Select a point on the map to view its coordinates.

Loading map…

How to convert coordinates

UTM to WGS84 latitude and longitude

Enter the UTM zone, hemisphere, easting and northing, then select Search and convert. Easting and northing are in metres. Check the datum of your source: this converter interprets UTM coordinates on WGS84. A zone letter can mean a latitude band or a hemisphere, so check the notation used by your source.

Example: UTM 15N 771848 2231831 is approximately 20.16466°, -90.39917°.

Try the UTM example

MGRS to WGS84 latitude and longitude

Enter the grid zone, square letters and equal numbers of easting and northing digits. More digits describe a smaller grid square. The converter uses the centre of that square for the WGS84 result; it supports MGRS within the UTM coverage area, from 80° south to 84° north.

Example: 15QYC 71848 31831 is approximately 20.16467°, -90.39917°.

Try the MGRS example

Coordinate formats and precision

WGS84 latitude and longitude can be written as decimal degrees, degrees and decimal minutes, or degrees, minutes and seconds. UTM uses a zone and metre coordinates; MGRS expresses a grid square using letters and digits. Choose the format used by your source and check the coordinate order. Changing display precision does not make the original position more accurate.